2015 CNC MASTERS CNC BARON BENCH TOP MILL WITH 4AXIS & ELECTRONIC VARIABLE SPEED, 220 V-1PH

X Axis: Left/Right Table Travel 19″ 485mm
Y Axis: Forward/Back Table Travel 7″ 175mm
Z Axis: Spindle Up/Down Travel 5″ (127 mm)
Maximum Distance from Spindle Nose to Table 18″ 480mm
Motor Power 2 HP
Overall Height (w/o stand) 43-1/2″ 1100mm
Machine Stand Height 30″ 760mm
Drilling Capacity 1-1/4″ 32mm
End Mill Capacity 3/4″ 20mm
Swing 15-7/8″ 405mm
Spindle Taper R-8
Diameter of Spindle Sleeve 3″ 75mm
Head Swivel 360 degrees
Computer Connection to Control Unit USB Port, Windows 10 or 11 PC 64 bit
Diameter of Column 4-1/2″ 115mm
Overall Length (end of table to end of X motor handle) 38.5″
Overall Width (back of spindle motor to Y motor handle) 38″
CNC Jr. Table Top Mill Spindle Speed 12 speed (120-3000rpm)
Working Area of Table 28-3/4 x 8-1/4″
Max Movement Area 60″ (1524 mm) x 38″ (965.2 mm)
CNC Jr. Table Top Mill Weight 700 lbs.
Table Top Milling Machine Power Requirements
110VAC dedicated circuit with a NEMA 5-15R
208, 220 to 240 VAC, single or three phase with ground @ 15 amp service required
Accuracy +/- 0.003″ (or 0.0762 mm)
Repeatability within 0.0005″ (or 0.0127 mm)
Resolution 0.0002″ (or 0.006 mm)