TRAVELS: S.A.E
X Axis: 60.0 in
Y Axis: 20.0 in
Z Axis: 20.0 in
Spindle Nose to Platter (~ max) 24.0 in
Spindle Nose to Platter (~ min) 4.0 in

SPINDLE S.A.E METRIC
Max Rating: 30.0 hp
Max Speed: 12000 rpm
Max Torque: 90.0 ft-lbf @ 2000 rpm
Drive System: Inline Direct-Drive
Taper: CT40  | 
Bearing Lubrication: Air / Oil Injection
Cooling Liquid Cooled

B AXIS - TILT S.A.E
Travel: 120 ° to 35- °
Max Speed: 170 °/sec
Max Torque: 2240 ft-lbf
Brake Torque: 2000 ft-lbf

C AXIS - ROTATION: S.A.E
Travel 360 °
Max Speed: 179 °/sec
Max Torque: 1854 ft-lbf
Max Part Swing: 27.0 in
Brake Torque: 900 ft-lbf

PLATTER: S.A.E
Platter Diameter: 19.70 in
Max Weight on Platter: 660 lb
T-Slot Width: 0.626 in to 0.630 in
Number of Std T-Slots: 7
T-Slot Center Distance: 2.48 in

TABLE: S.A.E
Length: 32.0 in
Width: 18.0 in
T-Slot Width: 0.626 in to 0.630 in
T-Slot Center Distance: 4.92 in
Number of Std T-Slots: 3

FEEDRATES: S.A.E
Max Cutting: 650 ipm
Rapids on X: 1200 ipm
Rapids on Y: 1200 ipm
Rapids on Z: 1200 ipm

AXIS MOTORS: S.A.E
Max Thrust X: 2750 lbf
Max Thrust Y: 2750 lbf
Max Thrust Z: 3400 lbf

TOOL CHANGER S.A.E
Type:SMTC
Capacity:30+1
Max Tool Diameter (full): 2.5 in
Max Tool Diameter (adjacent empty): 5.0 in
Max Tool Length (from gage line): 12 in
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s

GENERAL: S.A.E
Coolant Capacity: 55 gal

AIR REQUIREMENTS: S.A.E
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8 in
Coupler (Air):3/8 in
Air Pressure Min: 80 psi

ELECTRICAL SPECIFICATION: S.A.E
Input AC Voltage (3 Phase) - Low 220 VAC
Full Load Amps (3 Phase) - Low 70 A

STANDARD FEATURES
High-Speed 30+1 Side-Mount Tool Changer 
Wireless Intuitive Probing System
Control Cabinet Cooler 
Control Touch Screen 
Media Display M-Code; M130 
HaasConnect: Remote monitoring 
Early Power-Failure Detection Module 
Ethernet Interface 
WiFi Connection for the Haas Control 
Safe Run 
HaasDrop 
Large Remote Jog Handle with Touchscreen Display 
Rigid Tapping 
Dynamic Work Offsets and Tool Center Point Control 
High-Speed Machining 
Standard Program Memory, 1 GB 
Second Home Position 
Power Surge Protection