2022 HAAS EC-1600ZT w/ 4th Axis Platter, 10K RPM, TSC, PROBING, LOW HOURS
Horizontal Machining Centers
NEW REPLACEMENT COST: $441,140
The widely acclaimed Haas EC Series Horizontal Machining Centers (HMCs) provide ample workspaces and a maximum part capacity of 10,000 lb, making them the ideal choice for addressing your large-part machining demands. These models feature optional 4th-axis rotary platters integrated into the T-slot table, allowing access to four sides of a part or tombstone, as well as enabling simultaneous 4th-axis machining.
| X | 64" |
| Y | 50" |
| Z | 40" |
| Power | 60 hp |
| RPM | 10,000 RPM |
| # ATC | 50 |
| Taper | 50 CT |
| Pallet-W | 30" |
| Pallet-L | 30" |
| # Axis | 4 |
TRAVELS S.A.E METRIC
X Axis 64.00 in 1626 mm
Y Axis 50.00 in 1270 mm
Z Axis 40.00 in 1016 mm
SPINDLE S.A.E METRIC
Max Rating 30.0 hp 22.4 kW
Drive System 2-Speed Gearbox 2-Speed Gearbox
TABLE S.A.E METRIC
Length 64.0 in 1626 mm
Width 36.0 in 914 mm
Max Weight on Table (evenly distributed) 10000 lb 4536 kg
INTEGRATED 4TH AXIS (B AXIS) S.A.E METRIC
Table 64 in x 32 in 1626 mm x 813 mm
Platter Diameter 30.00 in 762 mm
Travel 360 ° 360 °
Max Part Swing 78.0 in 1981 mm
Max Weight on Platter 10000 lb 4536.0 kg
GENERAL S.A.E METRIC
Coolant Capacity 95 gal 360 L
TOOL CHANGER S.A.E METRIC
Type SMTC SMTC
Capacity 50+1 50+1
Max Tool Diameter (full) 4.0 in 102 mm
Max Tool Diameter (adjacent empty) 10.0 in 254 mm
Max Tool Length (from gage line) 20 in 508 mm
Max Tool Weight 30.0 lb 13.6 kg
AIR REQUIREMENTS S.A.E METRIC
Air Required 9 scfm @ 100 psi 255 L/min @ 6.9 bar
Inline Air Hose 3/8 in 3/8 in
Coupler (Air) 3/8 in 3/8 in
Air Pressure Min 80 psi 5.5 bar
ELECTRICAL SPECIFICATION S.A.E METRIC
Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC
Full Load Amps (3 Phase) - Low 70 A 70 A
Input AC Voltage (3 Phase) - High* 440 VAC 440 VAC
Full Load Amps (3 Phase) - High* 35 A 35 A
DIMENSIONS - SHIPPING S.A.E METRIC
Weight 29700 lb 15876.0 kg
High-Performance 10,000-rpm Spindle
300 Psi (21 bar) TSC (Through Spindle Coolant)
4th Axis Rotary Platter
WIPS (Wireless Intuitive Probing) No
Tool Air Blast
DWO/TCPC (Dynamic Work Offsets/ Tool Center Point Control)
HSM (High Speed Machining)
*Tooling and Tombstone are NOT included in the sale.
